The Maintenance Business · Reliability Value Model™
Reliability is designed.
Not hoped for, not bought, but designed. TMB moves asset-intensive companies from reactive maintenance to value-driven asset management, with a proprietary model, twenty-five years of plant experience and AI-accelerated analysis.
The problem
Downtime isn't bad luck. It's a design flaw.
Every unplanned shutdown has a history: a failure mode nobody analyzed, an inspection that never existed, a part that wasn't in stock. Reliability originates upstream, in strategy, analysis and organization, long before the failure announces itself.
That's why TMB doesn't start at the failure, but at the system that made it possible. We measure where your organization stands, design the maintenance regime that fits, and help build the execution. Measurable, methodical, and without reports that end up in a drawer.
Sound familiar?
Six situations, six answers.
This is what that design flaw looks like on the floor. Per situation: the problem you recognise, how we tackle it and what you are left with.
PME & PMOPreventive maintenance that actually prevents something
Sound familiar?
Over the years your preventive maintenance plan has grown to hundreds of tasks. Technicians walk the same rounds every month, tick "OK", and still that one pump fails unexpectedly. Nobody remembers why a task was ever created.
How we tackle it
- We pull your PM tasks from your CMMS (Maximo, SAP PM, Ultimo …) and link them to the failure history.
- For each task we ask: which failure mode does it prevent? Is the frequency justified? Can it be condition-based instead of time-based?
- Duplicate, redundant and "comfort" tasks are removed or merged; missing tasks on critical assets are added.
- Clear task descriptions with measurements and limits, so that "OK" means something again.
What you are left with
A leaner PM plan in which every task has a reason.
RCMThe right maintenance on the right installation
Sound familiar?
You are starting up a new production line, or an existing installation causes more and more downtime. Maintenance was taken over from the supplier or has "always been done this way". A critical compressor gets as much attention as a fan in the warehouse.
How we tackle it
- Together with your operators and technicians we define the functions of each system and what "failure" means for safety, environment, production and cost.
- We walk through the RCM decision logic: predictive, preventive, inspection, run-to-failure or redesign.
- Every maintenance decision is documented, so it can be handed over and reviewed later.
- The result is converted directly into tasks in your CMMS.
What you are left with
Maintenance in proportion to the risk: more focus on what is critical, less effort where it yields nothing, and a strategy you can justify to management.
FMEA & FMECAKnowing where it can go wrong, before it does
Sound familiar?
You are facing an investment or a process change and want to know in advance which risks you are bringing in.
How we tackle it
- We facilitate a workshop with the people who know the installation best: operators, technicians, process engineers.
- For each component we map failure modes, causes and effects.
- In an FMECA we score every failure mode on severity, likelihood and detectability, so it is clear which risks to tackle first.
- For each priority risk a concrete action: PM change, monitoring, spare part, design change or procedure.
What you are left with
A ranked risk list with an owner and an action per risk, a team that speaks the same language about failure behaviour, and fewer repeat failures.
Maintenance quick scanWhere does your maintenance stand today?
Sound familiar?
You feel your maintenance organisation could do better, but where do you start? Is it planning, spare parts, the data in the CMMS or the cooperation with production? Everyone has an opinion, nobody has an objective picture.
How we tackle it
- In a few days on site we talk to maintenance, production, purchasing and stores, and we walk along on the floor.
- We assess your organisation against a fixed maturity model: from reactive (firefighting), through preventive and condition-based, to proactive and reliability-driven.
- We look at strategy, work preparation and planning, CMMS use, spare parts, KPIs, competences and cooperation.
What you are left with
A clear report with your current level per domain, the three to five improvement actions with the biggest impact, and a realistic step-by-step plan to the next level. Ideal as a starting point or as a baseline before an improvement programme.
Obsolescence scanNo more surprises when a part fails
Sound familiar?
A PLC card fails and the supplier tells you the type has not been available for years. The line stands still while you search second-hand sites. Or you know your controls and drives are outdated, but not which will become a problem first.
How we tackle it
- We inventory your critical components: PLCs, HMIs, drives, sensors, motors and key mechanical parts.
- For each component we determine the manufacturer's life-cycle status (active, end-of-sale, end-of-support) in line with IEC 62402.
- We link this to the criticality of the installation and your spare-parts stock.
- For each risk a recommendation: last-time buy, alternative part, repair partner or planned migration.
What you are left with
An obsolescence overview with a risk score, a priority list and a migration plan you can include in your investment budget. Replacing becomes a choice instead of an emergency.
OEE scanDiscover where your capacity goes
Sound familiar?
Your line runs according to plan, but output never reaches what the machine can do on paper. Is it downtime, running slower or rejects? Production points at maintenance, maintenance at the raw material. Something is measured, but nobody trusts the figures.
How we tackle it
- We measure the OEE of one or more lines over a representative period, based on your data and our own observations.
- We split the loss into availability, performance and quality, and further into the classic six big losses (breakdowns, changeovers, micro-stops, speed loss, start-up rejects, production rejects).
- For each loss category we show the cause and who can influence it: maintenance, production, planning or quality.
What you are left with
A reliable baseline, a loss tree that shows at once where the gain is, and concrete actions. Often there turns out to be hidden capacity that needs no investment in a new machine.
Why early intervention pays off
Every failure announces itself.
- Design & strategyThis is where reliability begins
- Point PFailure becomes measurable
- DegradationAudible, tangible, visible
- Point FFunctional failure
The distance between P (the first detectable signal) and F (functional failure) is the work window of good maintenance. TMB shifts your organization to the left on this curve, with a tailor-made strategy: from repairing after F, to detecting at P, to designing before the curve even begins.
The model
The Reliability Value Model ™
Order, work orders, daily planning and KPIs: the foundation everything else rests on.
Critical assets, standards, history and a CMMS that's actually accurate.
PM routines, spare-parts policy, RCA and condition monitoring as a system.
FMEA/RCM, shutdown optimization and digital maintenance drive you forward.
Risk-based maintenance, TPM and long-term asset management at board level.
Where do you stand today? The RVM maturity audit answers that question in days, not months. You get a radar chart, priorities and a route per level.
Request the RVM reference handbookServices
From diagnosis to execution.
One goal: demonstrably more reliable installations. From baseline measurement and analysis to training, tool selection and full project management. Every engagement starts small, delivers fast and scales with results.
RVM maturity audit
33 audit points across 5 levels, assessed on site. You get a sharp baseline, a radar profile per domain and a prioritized improvement agenda. That is how every engagement starts.
RCM / FMECA & PM strategy
Analyzing failure modes, tracing tasks back to what demonstrably adds value, and redesigning the preventive program, including export to your CMMS (SAP PM, Maximo, Ultimo, D365).
Asset management & compliance
ISO 55001 asset management, Seveso obligations and safety instrumentation (IEC 61511) translated into working systems. Demonstrable control, not a paper reality.
AI-accelerated analysis
Proprietary tooling that accelerates FMECAs, PM-building and annual planning from weeks to days. The methodology stays in the lead; AI does the heavy lifting and our engineers check every result.
OEE quickscan
Where is your capacity disappearing? In a few days we measure availability, performance and quality, build the loss tree and quantify what every stoppage really costs. Your baseline and biggest levers, in black and white.
OEE improvement programme
From losses to structural gains. At the bottleneck we tackle the biggest losses: changeover times, micro-stops, speed loss. We embed the approach in shop-floor routines and KPIs, and the result is measurable in OEE points.
Coaching & training
Knowledge that stays in-house. From RCM, FMECA and criticality to work preparation and KPI use. Hands-on sessions on your own installations, tailored to operators, technicians and managers alike.
CMMS & tool selection
The right package, not the most expensive one. We translate your processes into a level-headed set of requirements, compare CMMS and reliability tools objectively (SAP PM, Maximo, Ultimo, D365, Dynaway) and guide the choice through to implementation.
Improvement projects from A to Z
A good plan stalls without direction. We coordinate your improvement project end-to-end: scope and business case, planning and budget, steering internal teams and contractors, through to embedding it in daily operations. One point of contact, from the first idea to the result in your numbers.
Proof from the field
Results you can verify.
More than twenty-five years of hands-on experience leaves a trail. Three representative engagements, illustrating what our approach delivers. We are happy to walk you through the context and references in person.
Food producer · OEE improvement programme
OEE points on the bottleneck line
Changeover times halved, micro-stops made visible and tackled. The result stood after six months and still stands today.
Anchored in shop-floor routines and KPIs
Seveso chemical site · FMECA with AI tooling
FMECA study lead time
A study that classically takes months stood in weeks: our AI tooling did the heavy lifting, our engineers validated every failure mode.
Ready for use in the CMMS
Tank terminal · Maintenance Manager as a Service
overdue work orders (backlog)
Nine months of interim cover after an unexpected departure. Work preparation and planning rhythm rebuilt, team and contractors realigned.
The system stood firm after handover
As a Service
Capacity when you need it.
Maintenance Manager as a Service
Interim · Fractional · 1–5 days / week
An experienced maintenance manager, without the fixed payroll cost. We take the lead of your maintenance organization: bridging a departure, reinforcing during peak periods, or as a standing fractional role.
- Directing the team, contractors and shutdowns
- Budget, KPIs and reporting to plant management
- Work preparation and a planning rhythm that sticks
- Leaving behind a stronger system than we found
Maintenance Supervisor as a Service
Interim · Shift coverage · On the floor
The link between plan and execution. An experienced supervisor who directs the shift daily, prepares the work and safeguards execution, so the plan actually happens on the floor.
- Daily direction of technicians and contractors
- Work preparation, permits and LOTO discipline
- Work-order follow-up and feedback in the CMMS
- Bridge between shop floor, planning and management
Reliability Engineer as a Service
By the day · Per deliverable · AI-accelerated
Reliability engineering as a tap you turn on. Senior engineers, backed by our own AI tooling, for when the work peaks or the expertise isn't in-house.
- FMECA / RCM analyses and complete PM packages
- Root cause analysis for recurring failures and bad actors
- Criticality and spare-parts analysis
- Ready to deploy, no hiring process
The mission
TMB designs reliability.
We move asset-intensive companies from reactive maintenance to value-driven asset management, with results that are verifiable in the boardroom and tangible on the shop floor, and a system that keeps standing after we have left.
Risk is the currency
Every reliability decision is a risk decision: probability times consequence, weighed against cost. Explicit risk makes maintenance discussable in the boardroom.
Value, not cost, is the goal
Cost control is a consequence of good reliability management, not a starting point.
Criticality sets the depth
Not every asset deserves the same analysis; the effort scales with what is at stake.
Quality over volume
Deliberately small and highly specialised, doing deep work for a limited number of clients.
Tangible or it didn't happen
A result only counts once it is measurable in the boardroom and felt on the shop floor.
Every engagement ends in a working system, not in a report.
Five core values · from the Reliability Value Model™
The team
Two engineers, one shop floor.
TMB is not an anonymous firm. Behind every audit and every improvement programme are the two founders themselves. People who earned their stripes between the installations, not next to them.
Sam
Co-founder · Maintenance & Reliability
Sam takes maintenance organisations from firefighting to under control. He looks at work processes, engineering, new technology and above all the people who have to work with them. On every programme he shows the impact it has on EBITDA, reliability and safety.
“Not a plan for the drawer, but a system that pays off on the floor.”
Christophe
Co-founder · Asset Management & Compliance
Your point of contact for: Maintenance quick scan, Obsolescence scan, Criticality analysis.
At home in asset management, Seveso and ISO 55001 programmes. Christophe translates regulation and methodology into systems that provably work on the floor, not on paper.
“Eight years on the floor, two at the helm, now at your side.”
Process
Getting started is simple.
No months-long preliminary studies. Three steps, each with a concrete result. You decide after every step whether we continue.
Introductory call
We listen: your installation, your pain points, your ambition. You get an honest assessment right away of whether and where we can add value.
Quick scan
The RVM maturity audit: 33 points, 5 levels, turnaround in days. Result: a radar profile, your biggest levers and a substantiated recommendation.
Roadmap & execution
An improvement plan with demonstrable value at every step. We help execute it on the floor, as a project or as your maintenance manager or reliability engineer as a service.
After step one, you know where you stand. After step two, you know what it delivers. No obligation until you decide otherwise.
Plan step oneContact
Talk to an engineer, not a salesperson.
Tell us briefly where you stand. You'll hear from us within one business day, with an initial assessment instead of a brochure.
- info@tmb-be.com
- Web
- tmb-be.com
- Region
- Belgium & Benelux · on site at your facility
- Response time
- Within one business day
- Company
- TMB BV — The Maintenance Business